Hi all,

I have made a prototype of OLED miniature version od the Weekender. The PCB is small (50x65 mm = 2x2 1/2 inch). I have used Arduino Pro Mini, 1.3 " OLED, for speaker/microphone I have used cheap Baofeng microphone/speaker, hence two sockets you see on the image. SW offers same as it was in the Weekender: programming Weekender Channels via simple PC program. 

Echo low PMR low Repeater mode  Free set    

 Now I have to catch all the "glitches" on the PCB and reroute a new PCB.

You can see that prototype is connected with several wires, because Arduino Pro Mini has no USB programming socket. Hence I had to use MiniPin AVR development board.

MiniPin itself cannot program an AVR that we place in it. It requires Proggy II programmer for that. But for Arduino that has no USB socket MiniPin II ins a perfect programming tool.

73s de S52CQ, Jure